Step 1: Mounting the Device

1. Attach the Nookode CarPlay unit to the provided support bracket.
   (Refer to image for correct assembly)

2. Clean the car dashboard surface where the device will be placed to ensure proper adhesion.

3. Position the device on the dashboard and press the button to activate the suction cups and secure it firmly.
   (Refer to image for visual guidance)

Step 2: Power Connection

4. Connect the power cable to the car’s cigarette lighter socket.
   (Refer to image for connection details)

5. Plug the other end of the cable into the Nookode CarPlay unit.

6. Turn on the device.

Software Setup

Step 1: Audio Connection Options

Choose one of the following methods to connect audio:

1. Bluetooth Connection

   • Enable Bluetooth on your car.
   • Select Bluetooth on the Nookode device.

2. AUX Cable Connection

   • Plug the AUX cable into the Nookode device.
   • Connect the other end to your car’s AUX port.
   • Select AUX on the device.
     (Refer to image for connection setup)

3. FM Frequency Connection

   • Select an FM frequency on the Nookode device (recommended between 90 Hz and 120 Hz).
   • Avoid frequencies used by local radio stations to minimise interference.
   • If you experience interference, try adjusting to a different frequency.

Step 2: Smartphone Connection

7. Connect your smartphone via Apple CarPlay or Android Auto, depending on your device.
   (Refer to image for connection details)

8. Once connected, your device is ready for use.
   Enjoy your drive!